PC-Less Connection to Multiple IP Cameras and Visibility-Enhancing Technology
The DuraVision FDF2304W-IP can operate without a PC, allowing the monitor to be freely mounted on the wall or ceiling. This eliminates the need to arrange PC placement and simplifies cable management.
The DuraVision FDF2304W-IP displays the video feed from up to sixteen separate IP security cameras* via LAN cable for efficient video management in security and surveillance environments.
Using the included remote control you can quickly adjust the settings for connected IP cameras such as tilt, pan, zoom, brightness, and focus.
Select from five different layouts to view video from each IP camera on a single screen. Video layout can be changed using the included remote control. You can also set the monitor to sequentially switch between up to four video feeds.
Smart Insight visibility-enhancing technology automatically detects areas that are dark and difficult to see by adjusting the brightness of each pixel, brightening images while reproducing them with a realistic sense of depth. Areas that are difficult to see due to low ambient lighting are enhanced for increased visibility.
Day and Night preset modes are optimized for displaying images under different environmental conditions throughout the day. You can easily switch between modes with the included remote control.
The monitor uses an IPS panel with wide viewing angles for minimal color shift and contrast change no matter where the monitor is viewed from. This ensures accurate color reproduction and clear visibility all the way to the corners of the screen.
Individually optimize Smart Insight and Smart Resolution function settings for up to 4 connected cameras in any layout. This is helpful when multiple cameras are used in environments with differing ambient lighting conditions.
The monitor is equipped with a safety lock that can lock it in place on a desk or other surface, preventing the monitor from being knocked over or removed.
The monitor is built for 24-hour use and is backed by a two-year manufacturer’s warranty for long-term reliability.
The DuraVision FDF2304W-IP supports the Open Network Video Interface Forum (ONVIF) for the interface of IP-based security products. Support for IP cameras with ONVIF Profile S increases flexibility of installation and ensures interoperability with a wide range of products for a secure investment.
Smart Resolution blur-reduction technology analyzes the displayed content and ensures that noise is not accentuated while correcting blurred areas for a sharper, clearer image. For images with a great deal of depth, it sharpens the foreground more strongly to maintain a real world sense of focus.
The monitor includes settings to reduce the amount of block noise that occurs due to video compression.
The non-glare panel dissipates reflective light that would normally make the screen difficult to view and strain the eyes.
Images are displayed pixel-by-pixel in full high-definition (1920 × 1080) that fills the entire screen. Images taken with a full-HD camera maintain fine detail when viewed on the monitor.
The monitor reproduces smooth images by converting an 8-bit input signal to 10 bits within the monitor and selecting the optimum color values from a 10-bit LUT. The optimized data is then converted back to an 8 bit output signal, resulting in smoother gradations.
An overdrive circuit accelerates gray-to-gray response time to just 8 ms which minimizes ghosting and blurring during high motion video capture for clear video reproduction.
The monitor is equipped with an LED backlight to regulate brightness and make flicker unperceivable. This greatly reduces eye fatigue when viewing the screen for extended periods of time.
The wide dimming range of 3 cd/m2 up to 300 cd/m2 allows you to adjust to the appropriate brightness level for viewing in dim or changing ambient lighting conditions.
A VESA mount option is also available for mounting the monitor onto walls or other surfaces.
The AC power supply is built-in so you can connect easily with only one power cord.
|Model Variations||With Stand|
|Size||23" / 58 cm (584 mm diagonal)|
|Native Resolution||1920 x 1080|
|Viewable Image Size (H x V)||509.1 x 286.4 mm|
|Pixel Pitch||0.2652 x 0.2652 mm|
|Grayscale Tones||256 tones (a palette of 1021 tones)|
|Display Colors||16.7 million|
|Viewing Angles (H / V, typical)||178°, 178°|
|Brightness (typical)||300 cd/m2|
|Contrast Ratio (typical)||1000:1|
|Response Time (typical)||8 ms (Gray to gray)|
|Input Terminals||IP Camera: RJ-45|
PC / AV: HDMI x 1
|Digital Scanning Frequency (H / V)||HDMI: 31 - 68 kHz / 49 - 61 Hz (VGA Text: 69 - 71 Hz)|
|Wired LAN||IEEE802.3ab(1000BASE-T) / IEEE802.3u(100BASE-TX)|
|Power Requirements||AC 100 - 120 V/ AC 200 - 240 V, 50 / 60 Hz|
|Maximum Power Consumption||61 W|
|Standby Mode||Less than 3.0 W (Quick start OFF) / Less than 33.0 W (Quick start ON)|
|Features & Functions|
|Preset Modes||Day, Night|
|OSD Languages||English, German, Japanese|
|Others||Brightness, Smart Insight, Smart Resolution, Block Noise Reduction, Camera Control(Brightness, Preset, Focus, Zoom, Pan, Tilt), Date and Time, Network Setting, Display Position(1/4/9/16/8), Camera(Auto Discovery, Manual Registration), HDMI Color Space, Key Lock, Power Indicator, Reset|
|Dimensions (Landscape, W x H x D)||563.5 x 411.5 x 157 mm|
|Dimensions (Without Stand, W x H x D)||563.5 x 325 x 63 mm|
|Net Weight||7.9 kg / 17.4 lbs|
|Net Weight (Without Stand)||5.5 kg / 12.1 lbs|
|Tilt||30° Up, 0° Down|
|Hole Spacing (VESA Standard)||100 x 100 mm|
|Operating Temperature||0 - 35 °C|
|Operating Humidity (R.H., non condensing)||20 - 80 %|
|Certifications & Standards (Please contact EIZO for the latest information.)||CB, CE, cTUVus, FCC-B, Canadian ICES-003-B, TUV/S, VCCI-B, C-tick, RoHS, WEEE|
|Supplied Accessories||Power cord, Signal cable (HDMI - HDMI), remote control with battery, User's manual|
Thank you for your interest. One of our representatives will get in touch with you soon.!