The Re/Vue Lite supports resolutions of up to 1920 × 1200 from both digital and analog sources. It provides cost effective video encoding and streaming to connected monitors for ATC and C2 markets with mission-critical redundancy.
The Re/Vue Lite’s H.264 codec makes it ideal for applications where images have significant changes from frame to frame such as surveillance video or non-vector based images.
The Re/Vue Lite is equipped with duplicate encoding and streaming hardware and Ethernet adaptors for high reliability. The use of a single or dual power supply ensures continued operation in the event of external failure of a connected power source or network.
|Dual redundant encoding hardware, Ethernet, and power supplies ensure continued operation in the event of external failure|
As an independent hardware device isolated from the video signal to which it interfaces, the Re/Vue Lite is designed to be integrated as the video encoding component of a broader recording solution. It supports seamless integration into existing systems, offering a balance of compression and image quality for both digital and analog monitors.
Any commercially available software application supporting RTP and MPEG-TS can connect to the H.264-encoded stream to facilitate the live monitoring of connected devices. Remote recording is also possible when integrated with a system equipped to store and stream data.
Software recording solutions typically require a very specific operating system, drivers, and application software. The Re/Vue Lite encodes and streams video from connected monitors for recording in existing systems. It is platform and graphics board independent to ensure that issues associated with software-based recording solutions are avoided.
The Re/Vue Lite's configuration application supports other connected Re/Vue products for simplified management of all devices on the network. In addition, SNMP management, including configuration and performance parameters, allows for easy integration with other recording solutions.
|Configuration application provides device management for all Re/Vue Lite and other Re/Vue products through a single interface.|
Positioned between the computer's graphics board and the controller's monitor, the Re/Vue Lite encodes and streams the video screen without modifying the signal. If power is ever lost to the device, the integrated fail-safe video bypass ensures the screen will continue to receive video. This eliminates the need for an external active splitter device.
|Video Compression Ratio (Based on typical ATC data)||H.264 with configurable bit rate|
VBR and CBR support
Supported profiles: Baseline (BP), Main (MP), High (HiP)
|Supported Resolutions||640 x 480, 800 x 600, 1024 x 768, 1280 x 1024, 1600 x 1200, 1920 x 1080, 1920 x 1200|
|Maximum Video Resolution||1920 x 1200 single link DVI|
|Maximum Frames Per Second||Resolution dependant, minimum 20 Hz for all resolutions|
|Video Connectors||DVI-I (digital and analog) input and output with full EDID/DDC support; Fail-safe video bypass|
|Audio Connectors||3.5 mm stereo|
|Audio Format||MP3 standard – two channel up to 48 KHz sample frequency|
|Typical Power Consumption||12 W|
|Dimensions (W x H x D)||107 mm x 58 mm x 134 mm|
|Net Weight||0.386 kg|
|Ethernet||1 GbE x 2 – SNMP Management|
Thank you for your interest. One of our representatives will get in touch with you soon.!