A large 58-inch monitor ideal for operating rooms where multiple medical images need to be displayed simultaneously. The monitor can display 8 megapixels of high-resolution data in the level of detail essential for the OR.
The thinner bezels allow for a larger screen size compared with the monitor's predecessor, the RadiForce LS560W, while keeping the size and weight of the monitor consistent. This allows convenient installation using the same ceiling suspensions as the previous model.
Compared with multi-monitor environments, the RadiForce LS580W exhibits no regional color differences or obtrusive bezels between images on the screen, allowing users to view important information consistently and conveniently on a single screen.
Wide viewing angles allow you to view the screen from the side with minimal color shift, also permitting more than one person to view the monitor comfortably at the same time.
To ensure the most accurate and consistent shadings possible, EIZO carefully measures and sets every grayscale tone on the production line to offer monitors fully compliant with DICOM Part 14.
Monitor calibration can be carried out to maintain DICOM Part 14 compliance for rendering consistency over time.
The monitor is equipped with two independent LED backlights that offer a significantly longer service life over conventional CCFL backlights. In addition, you can maintain high brightness while simultaneously lowering power consumption. Since the LED backlights are mercury-free, they will also reduce any potential impact on the environment when they are disposed of.
EIZO's fully automated stability function makes use of an internal backlight sensor to quickly stabilize the brightness level at startup and to compensate for fluctuations caused by variations in ambient temperature and the passage of time.
Redundant power supplies and backlights as well as two DVI inputs give the monitor a high degree of operational reliability for creating a fail-safe environment. A monitoring function can be configured to notify the X-ray system in the event operating conditions become critical or a component fails.
The Digital Uniformity Equalizer (DUE) function provides optimum backlight luminance uniformity which is considered difficult to attain due to the characteristics of LCD monitors, especially with larger screen sizes.
With images displayed on the screen in real time, time critical aspects of image distribution are addressed to ensure safety during procedures such as catheter localization.
The monitor supports VESA mounting for conveniently installing in operating rooms.
The monitor meets the strictest medical, safety, and EMC emission standards.
|Type||Color TFT LCD Panel (VA)|
|Size||146 cm / 57.5" (1,460 mm diagonal)|
|Native Resolution||3840 x 2160 (16:9 aspect ratio)|
|Viewable Image Size (H x V)||1270.0 x 721.0 mm|
|Pixel Pitch||0.331 x 0.334 mm|
|Display Colors||8-bit colors: 16.77 million colors|
|Viewing Angles (H / V, typical)||176° / 176°|
|Brightness (typical)||700 cd/m2|
|Recommended Brightness for Calibration||350 cd/m2|
|Contrast Ratio (typical)||4000:1|
|Response Time (typical)||9.5 ms (Midtone)|
|Input Terminals||DVI-D (dual link) x 2|
|Digital Scanning Frequency (H / V)||131.3 kHz / 59.7 - 60.3 Hz|
|Power Requirements||AC 100 - 240 V: 50 / 60 Hz|
|Maximum Power Consumption||400 W|
|Power Save Mode||Less than 38 W|
|Power Management||DVI DMPM|
|Net Weight (Without Stand)||47 kg|
|Hole Spacing (VESA Standard)||400 x 400 mm, M8, depth 16 - 20 mm|
|Degree of Protection||IP20|
|Certifications & Standards (Please contact EIZO for the latest information.)||CE (Medical Device Directive), IEC/EN60601-1 (2nd edition), IEC/EN60601-1 (3rd edition), CAN/CSA C22.2 No. 601.1-M90, CAN/CSA C22.2 No. 60601-1-08, GB4943.1 (non-tropical, altitude<2000 m), UL60601-1, FCC-B, RoHS, China RoHS, WEEE, CCC|
|Supplied Accessories||AC power cord, dual link signal cable (DVI-D - DVI-D) x 2, Utility Disk (PDF Instructions for Use)|
Thank you for your interest. One of our representatives will get in touch with you soon.!