EIZO FlexScan S1933 19-inch IPS Square Monitor

Monitors

EIZO

EIZO FlexScan S1933 19-inch IPS Square Monitor

FlexScan S1933
19" (48 cm) LCD Monitor
19" Square Monitor with IPS Panel  for Offices and Control Rooms

Key Features

  • IPS Panel with Wide Viewing Angles
  • Auto Image Adjustment
  • Viewing Comfort with an Ergonomic Stand
  • Optimized Brightness with Auto EcoView
  • 10-Bit Gamma Correction

Product Brochure:
Monitors - FlexScan_S1933.pdf

IPS Panel with Wide Viewing Angles

The IPS (in-plane switching) panel offers 178° viewing angles to minimize color shift and contrast when viewing the screen at an angle. This ensures stable and consistent display when two or more people view the screen at once or in a multi-monitor environment.

wide viewing angles

LED Backlight

With an energy-saving LED backlight, the FlexScan S1933 uses only 12 watts during typical operation. The LED backlight does not contain any mercury for minimal environmental impact when the monitor is eventually disposed of.

built-in speakersBuilt-In Speakers

0.5-watt speakers are tucked away at the back of the monitor and out of view so you can enjoy sound while bezel size is kept to a minimum. A headphone jack is also built into the monitor.

Optimized Brightness with Auto EcoView

The Auto EcoView function is a sensor on the front of the monitor that measures ambient light and optimizes the screen's brightness to a level akin to viewing a sheet of paper under typical office lighting conditions. Since the screen is never too bright, eye strain is reduced while power consumption is cut by up to 50% compared to operating the monitor with Auto EcoView turned off and set to the default factory brightness of 100%.

auto ecoview

Improved Work Efficiency, Reduced Visual Fatigue

EIZO conducted a survey to establish the relationship between eye fatigue and monitor use. The survey found that when you properly adjust your monitor’s brightness, the reduction in your ability to focus drops by half (Graph 1). In addition, maintaining correct working posture and taking regular breaks further reduced fatigue levels and increased work efficiency by 12.5% (Graph 2).

Comparison between fatigue levels after monitor use

vdt.gif

Quantity of VDT work per unit of time
vdt2.gif

EIZO monitor features like Auto EcoView, ergonomic stands, and the EyeCare utility help reduce eye fatigue and increase work efficiency.

Paper Mode Reduces Blue Light and Eyestrain

Paper mode simulates the look of printed paper by raising the black level and lowering the contrast ratio. Together with the Auto EcoView ambient brightness sensor, Paper mode reduces the amount of blue light emanating from the monitor for less eyestrain.

paper mode

Energy Savings across the Network

EIZO’s EcoView NET power management software provides centralized control over the power settings of monitors on a network. With EcoView NET, a systems administrator can confirm the settings for each monitor on the network, turn the power on or off, and if necessary, take measures to combat eye fatigue such as adjust the brightness or activate Auto EcoView. EcoView NET is available from EIZO distributors.

network.jpg

Made by EIZO

qualityWhile outsourcing production is now common practice in the monitor industry, EIZO continues to manufacture its products the same way it has throughout its 40-year history – with its own staff at its own factories. This allows EIZO to maintain close control over production quality and offer the industry’s only 5-year manufacturer’s limited warranty.

 

 

 


 

Auto Image Adjustment

The monitor discerns the input signal from the PC and automatically adjusts the clock, phase, image location, size, etc. In addition, the signal cables that are bundled were developed by EIZO to reduce noise.

Viewing Comfort with an Ergonomic Stand

Adjust the screen to the most comfortable position with 100 mm height adjustment, 30° tilt, 70° swivel, and 90° rotation for portrait mode.

height adjustable stand

VESA Mount Version

For customers that will provide their own VESA-compatible mounting solutions, the FlexScan S1933 is available without a stand.  

Anti-Glare Treatment

A non-glare screen reduces eye fatigue by dissipating reflective light that otherwise makes the screen difficult to view. Furthermore, the surface of the bezels is treated to prevent light reflection.

non glare

10-Bit Gamma Correction

This technology helps achieve accurate color by converting the 8-bit PC data to 10-bit, and assigning the ideal gamma values with a 10-bit look-up table (LUT) then returning the data to 8-bit format for display.

10-bit gamma

Preset Modes for Optimum Viewing

With EIZO’s Fine Contrast function you can choose from several preset modes for the various applications you work with. Toggling between modes can be done manually in the OSD menu or automatically by assigning a mode to a particular application with the bundled ScreenManager Pro for LCD software.preset mode

Prevents Eye Fatigue in Dimly-Lit Offices

Fine Contrast includes an EyeCare mode that reduces the scree’s brightness to just 3 cd/m2. This ultra-low brightness helps prevent eye fatigue and increase productivity when working in an environment with very dim ambient lighting such as a CAD studio.

Eye Care Utility

eye_care.jpgThe EyeCare utility is EIZO -developed software that helps promote better work habits. It consists of a function called “EyeCare Reminder” that reminds you to take scheduled breaks.

Digital and Analog Inputs

With both DVI-D and D-Sub mini 15-pin inputs, you can use a computer that has either a digital or an analog graphics board (or both if connected to two computers), and quickly switch between the inputs via a front panel button.

Sync-On-Green Signal Support

Support for sync-on-green ensures this monitor can be used with legacy graphics boards that output this signal.

Built to Last Five Years

EIZO’s five-year warranty is two years or 67% longer than the standard three-year warranty of most brands. Even if the initial purchase price of the FlexScan S1933 is higher than another 19-inch monitor, the TCO (total cost of ownership) will likely be lower due to the significantly longer buying cycle and less need for repair.

5 year warranty

Model VariationsWith Height Adjustable Stand, With Tilt Stand, Without Stand 
Cabinet ColorGray, Black
Panel 
TypeIPS
BacklightLED
Size19" / 48 cm (481 mm diagonal)
Native Resolution1280 x 1024 (5:4 aspect ratio)
Viewable Image Size (H x V)376.3 x 301.0 mm
Pixel Pitch0.294 x 0.294 mm
Display Colors16.77 million from a palette of 1.06 billion
Viewing Angles (H / V, typical)178°, 178°
Brightness (typical)250 cd/m2
Contrast Ratio (typical)1000:1
Response Time (typical)14 ms (Gray-to-Gray)
Video Signals 
Input TerminalsD-Sub mini 15 pin, DVI-D 24 pin (with HDCP)
Digital Scanning Frequency (H / V)31 - 64 kHz, 59 - 61 Hz (VGA Text: 69 - 71 Hz)
Analog Scanning Frequency (H / V)31 - 80 kHz, 50 - 75 Hz
Sync FormatsSeparate, Sync on green
Audio 
Speakers0.5 W + 0.5 W
Input Terminals3.5 mm stereo jack
Output Terminals3.5 mm headphone jack
Sound AdjustmentVolume
Power 
Power RequirementsAC 100 - 120 V / 200 - 240 V, 50 / 60 Hz
Maximum Power Consumption24 W
Typical Power Consumption12 W
Power Save ModeLess than 0.5 W
Power ManagementPower Save (VESA DPM and DVI DMPM), Eco Timer
Features & Functions 
Preset ModesFineContrast (Text, sRGB, EyeCare, Paper, Custom)
Auto EcoViewYes
OSD LanguagesEnglish, French, German, Italian, Japanese, Simplified and Traditional Chinese, Spanish, Swedish
OthersScreen Adjustment (Clock, Phase, Position, Range (Auto), Smoothing (5 stages), Color Adjustment (Brightness, Contrast, Temperature, Gain, Reset), Input Signal, Power Indicator, Product Information (name, serial number, resolution, operating time, etc.), OSD Menu Position, Adjustment Lock, DDC/CI Lock, Reset
Physical Specifications 
Dimensions (Landscape, W x H x D)With Height Adjustable Stand: 405 x 406.5 - 506.5 x 205 mm
With Tilt Stand: 405 x 416 x 205 mm
Dimensions (Without Stand, W x H x D)405 x 334 x 61.5 mm
Net WeightWith Height Adjustable Stand: 5.9 kg / 13.0 lbs
With Tilt Stand: 4.9 kg / 10.8 lbs
Net Weight (Without Stand)4.1 kg / 9.0 lbs
Height Adjustment RangeWith Height Adjustable Stand: 100 mm
With Tilt Stand: -
TiltWith Height Adjustable Stand: 30° Up, 0° Down
With Tilt Stand: 30° Up, 5° Down
SwivelWith Height Adjustable Stand: 35° Right / 35° Left
With Tilt Stand: -
PivotWith Height Adjustable Stand: 90°
With Tilt Stand: -
Hole Spacing (VESA Standard)100 x 100 mm
Environmental Requirements 
Operating Temperature5 - 35 °C
Operating Humidity (R.H., non condensing)20 - 80 %
Certifications & Standards (Please contact EIZO for the latest information.)TCO Displays 6.0, EPEAT Gold (height adjustable stand version) / Silver (tilt stand version) (US), TUV/Ergonomics, TUV/GS, C-Tick, CE, CB, cTUVus, FCC-B, Canadian ICES-003-B, TUV/S, VCCI-B, EPA Energy Star, RoHS, WEEE, China RoHS, CCC
Supplied Accessories (May vary by country. Please contact EIZO for details.)AC power cord, signal cables (D-Sub - D-Sub, DVI-D - DVI-D), audio cable, setup guide, CD-ROM (PDF user's manual, ScreenManager Pro for LCD [DDC/CI], ScreenSlicer software)
WarrantyFive Years
Dimension DrawingPDF
  1. 2  With current LCD technology, a panel may contain a limited number of missing or flickering pixels.
  2. 5  If the monitor is left on continuously over a long period of time, dark smudges or burn-in may appear. To maximize the life of the monitor, we recommend the monitor be turned off periodically.

Similar Products


Request a Quote from IDN S.A.L.

X

Inquiry Sent !

Thank you for your interest. One of our representatives will get in touch with you soon.!

Close this window