EIZO RadiForce LX470W



EIZO RadiForce LX470W

This 2 MP widescreen monitor is ideally suited for viewing DICOM X-ray images or serving as a repeater monitor in surgical environments. A wide range of input and output signals, the combining of pictures, and pre-calibrated gamma models permit tailoring the monitor to multiple specialties. The fanless design and the waterproof, easy-to-clean front panel enable usage in sterile hospital environments.

Key Features

  • Wide viewing angles for multiple people use
  • Diagnostic precision with factory adjustment
  • Consistency with DICOM part 14 calibration
  • Quick brightness stabilization for instant viewing
  • Wide range of input and output support

Wide Viewing Angles for Multiple People Use

Thanks to the wide viewing angles, images can be viewed simultaneously by several people with the highest quality reproduction and minimal color shift.

Diagnostic Precision with Factory Adjustment

To ensure the most accurate and consistent shadings possible, EIZO carefully measures and sets every grayscale tone on the production line to offer monitors fully compliant with DICOM Part 14.

Full High-Definition

With a native resolution of 1920 x 1080, the monitor can display original, full HD images in 1920 x 1080 resolution without blurring or distortion.

Dual Picture Viewing Modes

With Picture-in-Picture (PiP), Picture-and-Picture (PaP), and Picture-on-Picture (PoP) functions, different data sources, e.g. archived images or patient data can be reviewed simultaneously during an operation.

Fanless Silent Design

Engineered to dissipate heat without a fan, thus keeping distracting noises and circulation of dust and germs out of the operating room while ensuring the controlled laminar airflow remains undisturbed within the room.

Cabinet ColorBlack, White
TypeColor TFT LCD Panel (IPS)
Size119 cm / 47" (1,193 mm diagonal)
Native Resolution1920 x 1080 (16:9 aspect ratio)
Viewable Image Size (H x V)1039.7 x 584.8 mm
Pixel Pitch0.5415 x 0.5415 mm
Display Colors8-bit colors: 16.77 million colors
Viewing Angles (H / V, typical)178° / 178°
Brightness (typical)700 cd/m2
Contrast Ratio (typical)1000:1
Response Time (typical)9 ms (Midtone)
Video Signals 
Input TerminalsBNC (HD-SDI) x 1, BNC (Composite) x 1, DVI-I x 1, HDMI x 1, D-Sub mini 15 pin (Separate Sync, Composite Sync, SoG*,YPbPr*, RGBS*, RGB/HV*) x 1, S-Video x 1 
*Require use of D-Sub mini 15 pin to (up to 5) BNC adapter cable.
Output Terminals (Loop Through)BNC (HD-SDI, Composite) x 2, D-Sub mini 15 pin (VGA) x 1, S-Video x 1
Digital Scanning Frequency (H / V)15 - 100 kHz / 50 - 85 Hz
Analog Scanning Frequency (H / V)15 - 100 kHz / 50 - 85 Hz
Function1 upstream, 2 downstream
StandardRev. 2.0
Power RequirementsAC 100 - 120 V, 200 - 240 V: 50 / 60 Hz
Maximum Power Consumption270 W
Power Save ModeLess than 14W
Power ManagementDigital: DVI DMPM, 
Analog: VESA DPM
SensorBacklight Sensor
Features & Functions 
OSD LanguagesEnglish, German
Physical Specifications 
Net Weight40 kg
Hole Spacing (VESA Standard)400 x 200 mm
Environmental Requirements 
Degree of ProtectionIP54 for front, IP20
Certifications & Standards (Please contact the EIZO group company or distributor in your country for the latest information.)CE (Medical Device Directive), EN60601-1, UL60601-1, CSA C22.2 No. 601-1, IEC60601-1, FCC-A, C-Tick, RoHS, China RoHS, WEEE, CCC
Supplied AccessoriesAC power cord, signal cable (DVI-D - DVI-D), remote control, Utility Disk (user's manual)
WarrantyThree Years
Dimension DrawingGIF
  • Operating Rooms

Arm Mountable VESA Compliance

VESA compliance to be attached to existing mounting accessories.

Customer Assurance with Medical Standards

RadiForce monitors meet the strictest medical, safety, and EMC emission standards.

Quick Brightness Stabilization for Instant Viewing

EIZO's fully automated stability function makes use of an internal backlight sensor to quickly stabilize the brightness level at startup and to compensate for fluctuations caused by variations in ambient temperature and the passage of time.

Consistency with DICOM Part 14 Calibration

RadiForce monitors are calibrated to comply with DICOM Part 14 to offer rendering consistency over time.

Colors to Fit the Physician's Preference

The color, hue, saturation, brightness, contrast, temperature and tones of the display can be adjusted to best fit the physician's color preference.

Wide Range of Input and Output Support

EIZO offers multiple input signals to allow connections with both legacy and state-of-the-art endoscopic systems without the need of other optional devices or costs. With loop-through output support, the monitors are also ideally suited for multi-monitor integration or archiving in the operating room.

LCD Panel Protector for Easy Cleaning

The panel protector secures the screens from scratches, damages and liquids and alleviates cleaning and disinfection of the front surface.

Similar Products

Request a Quote from IDN S.A.L.


Inquiry Sent !

Thank you for your interest. One of our representatives will get in touch with you soon.!

Close this window