EIZO SMD19102

Monitors

EIZO

EIZO SMD19102

This one megapixel monochrome monitor accepts a wide range of current and legacy video, digital and RGB inputs. Its high brightness and contrast, combined with a cost effective design, create the perfect fit for many grayscale modalities and imaging environments.

Key Features

  • Diagnostic Precision with DICOM Part 14 Factory Adjustment
  • Wide Range of Input Support
  • Consistency with DICOM Part 14 Calibration
  • Versatile Positioning for Improved Operability

Product Brochure:
Monitors - bro_en_SMD19102.pdf

Diagnostic Precision with DICOM Part 14 Factory Adjustment

To ensure the most accurate and consistent shadings possible, EIZO carefully measures and sets every grayscale tones on the production line to produce a monitor compliant with DICOM Part 14.

Quick Brightness Stabilization for Instant Viewing

At startup or upon wakeup, the EIZO patented drift correction function quickly stabilizes the brightness level. In addition, a sensor measures the backlight brightness and compensates for brightness fluctuations caused by the ambient temperature and the passage of time.

Wide Range of Input Support

Multiple input signal support, including DVI-I, BNC, D-Sub mini 15 pin, and S-Video, allows for connecting with any legacy or state-of-the-art modality

BNC DVI-I

Customer Assurance with Medical Standards

Meets the strictest medical, safety, and EMC emission standards.

Consistency with DICOM Part 14 Calibration

Calibration compliant with DICOM Part 14 to ensure the most accurate and consistent shadings possible over time.

Support of Complex Timing Requirements

Although standard video signals are automatically recognized by the monitor, older medical equipment frequently causes problems by using timings outside the standard range. Such specialized application requirement can be entered by using the Force Mode function.

Wide Viewing Angles for Multiple People Use

Wide Viewing angles with minimal color shift when viewed from the side.

Last Image Hold

SMD 19102 DL with a Last Image Hold (LIH) function is specially designed for connecting to legacy radiography systems that do not have an LIH function. The function reduces radiation exposure for patients and radiologists.

Versatile Positioning for Improved Operability

EIZO's highly versatile stand offers tilt, swivel and a wide height adjustment range enabling you to use the monitor with greater comfort.

Warranty with Safety and Trust

EIZO and its authorized distributors offer a five-year limited warranty.

Model VariationsSMD 19102 D: With Stand
SMD 19102 DL: With Stand, with Last Image Hold function
SMD 19102 C: Without Stand
SMD 19102 CP: Without Stand, with Panel Protector
Cabinet ColorAnthracite Gray
Panel 
TypeMonochrome TFT LCD Panel (IPS)
BacklightCCFL
Size48 cm / 19" (481 mm diagonal)
Native Resolution1280 × 1024 (5:4 aspect ratio)
Viewable Image Size (H x V)376.0 × 301.0 mm
Pixel Pitch0.294 × 0.294 mm
Grayscale Tones256 tones
Viewing Angles (H / V, typical)170° / 170°
Brightness (typical)1,000 cd/m2
Recommended Brightness for Calibration400 cd/m2
Contrast Ratio (typical)900:1
Response Time (typical)25 ms (On/Off)
Video Signals 
Input TerminalsDVI-I x 1, D-Sub mini 15 pin x 1, BNC x 4, S-Video x 1
Output Terminals (Loop Through)BNC (SoG) x 1
Digital Scanning Frequency (H / V)31 - 100 kHz / 48 - 85 Hz
Analog Scanning Frequency (H / V)24 - 100 kHz / 50 -100 Hz
Sync FormatsSeparate, Composite, Sync-on-Green
Power 
Power RequirementsAC 100 - 240 V: 50 / 60 Hz
Maximum Power Consumption58 W
Typical Power Consumption26 W
Power Save ModeLess than 8 W
Power ManagementDigital: DVI DMPM, Analog: VESA DPM
SensorBacklight Sensor
Features & Functions 
Brightness StabilizationYes
OSD LanguagesEnglish, German
Physical Specifications 
Net WeightSMD 19102 D, SMD 19102 DL: 10.7 kg
SMD 19102 C: 6.4 kg
SMD 19102 CP: 7.0 kg
Hole Spacing (VESA Standard)100 x 100 mm, M4, depth 7 - 9 mm
Environmental Requirements 
Degree of ProtectionSMD 19102 D, SMD 19102 DL, SMD 19102 C: IP20
SMD 19102 CP: IP22 for front, IP20
Certifications & Standards (Please contact EIZO for the latest information.)CE (Medical Device Directive), EN60601-1, UL60601-1, CSA C22.2 No. 601-1, IEC60601-1, FCC-A, RoHS, China RoHS, WEEE, CCC, GOST-R
Supplied AccessoriesAC power cord, signal cable (DVI-D - DVI-D), Utility Disk (user's manual)
Dimension DrawingGIF

Similar Products


Request a Quote from IDN S.A.L.

X

Inquiry Sent !

Thank you for your interest. One of our representatives will get in touch with you soon.!

Close this window